Basement Work Scheduled

We have a start date for our basement project. Tim Austin is currently on a job and believes he'll be ready to start our basement project on Dec 15!! So, I guess it's time to get serious about this! I am not excited about emptying out the basement, but it needs to be done so I scheduled another storage space and we'll start moving stuff over as we pack.

We have a fairly simple "remodel" planned; it's not really going to be more finished than it is now but Tim will be bracing the house to the foundation and then installing a steel framework around the perimeter of the space which should provide further support. This is an example photo he sent me of another job he worked on.

Then Tim is going to level the floor as much as he can within the framed sections. We're not going for full-on level; that's not possible with our horrible floor without more effort than we're willing to pay for. This is another photo he sent as an example.

Once leveled, the floor is going to be finished with one of the Lifeproof plastic floors, probably in the Crosbyton Oak color. Tim assures us this flooring is one of the best options for an occasionally damp space. Even though our water infiltration problems went away once Jeff installed the French drain on the side of the house, it surely is better to plan for some future water seepage.

For the ceiling, I had originally wanted to install a dropped ceiling but it is already too low. With a dropped ceiling, we would lose several more inches so Tim persuaded me to replace the current sheetrock with new sheetrock after the wiring is finished. We will take good photos and dimensions to document the space once it is open so hopefully we'll have less destruction when we have future work to do.

This floor plan is roughly what we are hoping for once the space is finished. Really, the only change from the existing space is the addition of two closets and better lighting. We have made some minor changes since I did this SketchUp file, but they're not important enough for me to take the time to update SketchUp.

A couple days ago, I discovered some great wall-mounted arms to install Jeff's computer gear, so we'll be putting those in once the walls are up. Right now the computer gear is in the center of the room clamped to a table and looks so untidy so I'm really looking forward to this change.

LX Wall Monitor Arm

LX Wall Keyboard Arm

We have so much to do in the next couple of weeks. I guess I'd better get started tomorrow!

More News About Our Range

Our Ilve Range finally arrived in Portland, and it's the wrong f-ing color! It is gray, not green. I am not kidding. It is the worst possible color. Needless to say, I am not taking delivery. So, it looks like there won't be a thanksgiving dinner this year.

BASCO is therefore trying to fix it for us. Obviously, it is not really an option to wait for another range to come from Italy. I didn't get the final word yet, but I think we actually ended up ordering the Fisher & Paykel in black because it comes from Mexico and supposedly it will be here by mid-December. They say December, but I don't know if that's a wishful thinking due date. I hope not. I guess we shall see.

I am so tired of this. Though, possibly not as tired as Jeff, who does the cooking.

Range Rant

Do you guys remember this drama from last May? Our BlueStar range started on fire and we called out the fire department to put it out. (Jeff thought the gas line was burning and couldn't reach to get it turned off.)

We went back to BASCO in May and ordered a new range but we decided to try an induction range from Ilve that came in emerald green. Boy, was that ever a mistake. It was originally scheduled to come in mid-August, but it didn't. Then they gave us a revised date of the end of October. Well, I spoke to BASCO again yesterday, and now they're saying we won't get our range yet and they don't want to give any delivery date. 

I am so frustrated. First, BASCO sucks at communication. They basically ignore the situation until I call in looking for my range and then they have to figure out what's happening. And two, what was I thinking ordering a semi-custom range during a pandemic? Sigh.

Anyway, it's not actually clear whether we'll have a range by Thanksgiving. Finally, now BASCO will let me cancel the order (I put down a 50% non-refundable deposit) but do I really want to get in the back of the line for a new appliance?

So, I may start looking around and see if there is anything else that can be found. The space is 36" and most hardware store ranges are only 30" so I doubt we can walk into Lowes or Home Depot and just buy something off the floor.

On the bright side, Jeff has gotten quite good at cooking with the Instant Pot and toaster oven. He's been amazing dealing with our kitchen situation, but I am past ready for it to end, so I need to get on the phone and start calling around and see if I can find a different option.

Nearly Finished

We might fiddle with a couple of pieces of glass and lead came, but it's mostly ready for soldering. We also need to figure out how to cut out that metal border. We have a bunch of really long pieces and we'll need to cut them down to properly fit them to the outside edges.

Since we started this more than a decade ago, it will sure be nice to finally get it done.

Making Progress

I've been working pretty steadily on my stained glass project and I think I'm on track to finish by the end of the month. I'm finding the closer I get to the end, the easier it is to motivate myself to work on it. 

This piece is going to suck! It will probably take hours of grinding to get it right.

Dream Basement Plan

I spent a couple days playing in SketchUp again. The plan isn't as complete as I would like because my version is so old I can't download the fun free downloads. 

We have a big job ahead of us getting rid of all the extra stuff that will no longer fit. LOL

Since we still have a TON of douglas fir in our garage, we are going to try and build that media cabinet behind the TV.

The shelves are double-sided. The front side is the right depth for DVDs and the backside is a little deeper for the storage closet. The right side open shelves are for the home theater gear and our printer.

We're working up the plan with Tim Austin (the guy who built our garage) and he is expecting to be able to start in about two months. I'm crossing my fingers.

More Stained Glass

We are going to try and fix up our basement this winter so we're going to need to move out of it fairly soon; a project I am definitely not looking forward to.

So we are making another go at finishing our heraldic stained glass. I would like to finish it this month so we won't have to package it up again. I got in about four hours today.

We've gotten to the fiddly tiny pieces in the turtle's head but we're making good progress every day. If I keep at it, I will definitely be able to finish it this month if only I can avoid getting distracted by some quilting project. LOL